Heavy Chain Trencher
A drivable 60-tonne-class crawler chain trencher for pipeline and cable work with a live cockpit: an 8 m boom that lowers into the cut on two long lift rams, an 88-link digging chain with a heavy pick on every link running round a toothed head sprocket, planetary drives on the head shaft, a crumber, steel crawler tracks and an enclosed cab you can climb into. Playable in Unreal Engine 5.5 to 5.8; rigged FBX and GLB for other engines.
About this asset
A game-ready heavy-equipment hero asset: a pipeline-class crawler chain trencher in construction yellow, unbranded, built as a working machine you can drive.
It is playable out of the box. Walk up, climb the ladder, press E and you are in the seat. W and S drive the tracks forward and back, A and D steer them, I and K raise and lower the boom into the cut, Y and H raise and lower the crumber, the number keys 1 to 6 press the keypad's keys and light their lamps, U switches the work lamps, V swaps between the chase camera and the operator's seat, and E gets you out again when you have stopped. In Unreal Engine 5.5 to 5.8 it comes as a drive pawn on a ready site; for other engines the rigged FBX and GLB carry every clip.
The digging attachment works the way a real one does. The 8 m boom turns about the head shaft, from carried nearly level down 62 degrees into the cut, lifted by two long rams that run from the lift tower over the rear deck to clevis levers at the boom's head; the rams are solved every frame, so nothing slides or comes apart. Around the boom runs an 88-link digging chain, inner and outer links on pins and bushings, a heavy pick on every link in left, right and centre lanes, seated in a toothed head sprocket and turning a nose idler with its chain adjusters. A planetary drive and hydraulic motor on each end of the head shaft turn it. Behind the chain a crumber on its own arm cleans the trench floor and lifts clear.
The machine around it: two long steel crawler tracks on rollers and carriers, a ballast block across the front, an engine housing with service doors, louvres, a rear grille and two hollow exhaust stacks, the lift tower, fuel and hydraulic tanks with their fillers on the rear deck, walkway handrails, and real hydraulic lines: each ram's hoses to a line block on the tower and steel lines down to the deck, each head motor's hoses to the deck.
The cockpit is live. The instrument display is drawn by a shader from the machine's state: direction and gear, ground speed, an RPM bar, gauges and warning lamps. The travel joystick, the boom joystick, the crumber lever and the pedals move with the controls, and the armrest keypad carries the trencher's keys: chain, crumber, two-speed, auto, work lamps and park.
You can climb in: a ladder with stamped grip treads and hand-hoops up the left side to the deck, then a door into a cab glazed all round. Mirrors, work lamps, a beacon, and lamps on the tower aimed back over the boom.
The paint carries weathering with causes, baked into the textures: soil caked on the boom's belly and low on the frames, grease at the head and the rams' eyes, oil runs, dust on the tops, safety placards and a data plate.
Clips: DriveForward, DriveReverse, PivotLeft, PivotRight, TurnLeft, TurnRight, BoomLower, BoomRaise, ChainRun, CrumberRaise, CrumberLower, DoorOpen and DoorClose, plus the cockpit's own clips for the boom, the crumber, each track, the chain and each keypad key.
Includes FBX (skeletal mesh plus one FBX per clip), a GLB with every clip embedded, baked colour, normal, roughness and emission maps baked from the full-detail model, and LODs.
Unreal Engine: the download includes a ready-to-open Unreal project for UE 5.5, 5.6, 5.7, 5.8 and 5.9, the same projects Fab buyers get, with the meshes, materials, Blueprints and a demo map set up, alongside the FBX and GLB.
Rig
Mechanism rig, one bone per moving part; the lift rams solved per frame; the digging chain's links, head sprocket and nose idler running together; tracks, crumber, door and cockpit controls driven live
Engines and formats
Unreal Engine 5.5, Unreal Engine 5.6, Unreal Engine 5.7, Unreal Engine 5.8, Unreal Engine 5.9, Unity, Godot.
- FBX per package (static meshes with LODs and UCX_ collision, plus a skeletal rig with its clips)
- GLB per package and LOD
- PNG textures (tiling, baked and atlas maps)
- Unreal Python importer driven by the manifest
- Unreal Engine project per engine (5.5, 5.6, 5.7, 5.8, 5.9) with Blueprints, materials and a demo map
Help
Questions, bugs or requests: contact us. The product's page in the Exaro store has its full description and a 3D preview you can turn in the browser.






Made with our own production tools
Every Exaro asset is built, checked and packed for Unreal Engine with the same tools we sell: Exaro Model in Blender and Exaro for Unreal inside the editor, driven by the AI you already use.



